Demon Of The Fall
Active member
Hi all, i recently bought a triaxis and a 2:90... incredible gear and I Am planning to control it with a boss GT-100 and also use some of the effects of the GT-100, for example, compresors and boosters in front of the triaxis and all the modulations, delays, reverbs and eq in the loop of the triaxis or in between the triaxis and the 2:90.
But Iam not so sure about how to really hookup the GT-100 with the pre and the power. I know I want to use de 4CM but I dont know how will respond the loop of the triaxis with the loop of the GT-100... or is better not to use the loop of the triaxis at all?
I'm planning to use short cables and keep the 4U rack on the floor next to the GT100 to minimize the signal path and then 2 long speaker cables to the 4x12 in stereo. Here is the two signal chains I thinking.
1 guitar -> input gt100
1 gt100 send -> input triaxis
1 left output triaxis -> return gt100
2 output gt100 -> 2:90
or
1 guitar -> input gt100
1 gt100 send -> input triaxis
1 send triaxis -> return gt100
2 output gt100 -> 2 return triaxis
2 output triaxis -> 2:90
Thanks in advance
D
But Iam not so sure about how to really hookup the GT-100 with the pre and the power. I know I want to use de 4CM but I dont know how will respond the loop of the triaxis with the loop of the GT-100... or is better not to use the loop of the triaxis at all?
I'm planning to use short cables and keep the 4U rack on the floor next to the GT100 to minimize the signal path and then 2 long speaker cables to the 4x12 in stereo. Here is the two signal chains I thinking.
1 guitar -> input gt100
1 gt100 send -> input triaxis
1 left output triaxis -> return gt100
2 output gt100 -> 2:90
or
1 guitar -> input gt100
1 gt100 send -> input triaxis
1 send triaxis -> return gt100
2 output gt100 -> 2 return triaxis
2 output triaxis -> 2:90
Thanks in advance
D