Post your pedalboard

Guitar and bass FX discussion

Moderators: Guitarzan, Grandor, ned

fdesalvo
Mark IV
Posts: 719
Joined: Mon Jun 13, 2005 3:30 pm
Location: New Orleans to Los Angeles
Contact:

Re: Post your pedalboard

Post by fdesalvo » Tue Mar 20, 2012 12:50 pm

I have a smaller footswitch on the way and will be placing my TC Flashback on the lower tier.
Image

Had to make a custom power supply cable out of spare parts I had lying about. Even though it appears to be wrapped in painter's tape, the wires are twisted, soldered and double heat shrink wrapped.
Image

I used the tape on the edges of the aluminum plates to help mitigate the chances of damage to the wires' insulation on the rough edges. I'll be filing these smooth later on.
Image

Used my nippers to cut a groove for the zip tie.
Image


I can't recommend the Pedalpad highly enough. it's the only board out there that offers a staggered, two-tier design, so you don't have to point your toes and sharp-shoot to hit the pedals you need. You can set it up to be a stright incline if you wish, however. Two caveats - the power supply is utter crap that comes with these boards, so toss it. The other is that when touring, the TSA will disassemble the board to look underneath the plates - and they won't bother putting it back together...in the event you go on tour, use a pedaltrain.

Best,
~F
Ruining good moments since 1975

1993 Ibanez S540LTD
2011 Stiletto II | Homebrew 5E7 3x10

http://www.soundcloud.com/frankdesalvo

User avatar
Jackie
Mark IV
Posts: 812
Joined: Sat Dec 11, 2010 5:49 am

Re: Post your pedalboard

Post by Jackie » Fri Mar 30, 2012 8:38 am

Image

Also on the multi. I thought about getting individual pedals at some point but I get all my drive tones from the amp and these FX sound so great when you tweak them right I didn't really find a good reason to sell it or move to pedals.
GUITARS: heavily modded Epi Goth Explorer; Jackson KVMG Pro; Yamaha SG2000; Gibson SG '61 Reissue; Squier CV Tele
AMPS:Mesa/Boogie 2:90+TriAxis; Marshall JVM410H (modded); Marshall 1960A w/V30
FX:BOSS GT-6

User avatar
dante
Mark II
Posts: 73
Joined: Sun Mar 04, 2007 2:11 am
Location: Sacramento, CA
Contact:

Re: Post your pedalboard

Post by dante » Fri Mar 30, 2012 11:08 am

Oh how I love these threads :)

Image

TC Nova System : Boss Tuner : Mesa Amp Switch : Boss V-Wah. The silver tube is a flashlight - crucial to live giggin

benjamin801
Mark III
Posts: 181
Joined: Wed Mar 23, 2011 12:40 pm
Location: Salt Lake City, UT, USA

Re: Post your pedalboard

Post by benjamin801 » Fri Mar 30, 2012 11:35 am

dante, I just noticed your TU-2. Don't trust the Nova System's tuner? :wink:

TremoJem
Mark III
Posts: 421
Joined: Wed Mar 02, 2011 11:42 am

Re: Post your pedalboard

Post by TremoJem » Fri Mar 30, 2012 12:47 pm

It is my first one ever so be kind...

Image

All Neutrick Gold and Mogami 2524 for signal and Neutrick Nickel and Mogami 2319 for switching.

And yes, it took a few days to layout and solder everything.

I will say that this is the BlackBird pedalboard I bought online.

I customized it for my use, which included replacing two locking jacks with gold jacks and adding a gold locking jack and adding five nickel jacks for switching, other than the small drill holes for cables it was...stock.
Ibanez Jem 7VWH > Bad Horsie II Wah > Radial JX-2 ABY Switch > Two Tremoverb Combos
Mesa Channel Switch DTDP & Mesa FXLoop Switch DTDP
TC Electronic G-Major & Ernie Ball Volume Pedal & Behringer FCB 1010
Assorted Tubes
Series FXLoop

Geiri
Donating Member
Posts: 614
Joined: Thu Jan 18, 2007 6:44 pm
Location: Kópavogur Iceland

Re: Post your pedalboard

Post by Geiri » Fri Mar 30, 2012 2:16 pm

TremoJem wrote:It is my first one ever so be kind...

Image

All Neutrick Gold and Mogami 2524 for signal and Neutrick Nickel and Mogami 2319 for switching.

And yes, it took a few days to layout and solder everything.

I will say that this is the BlackBird pedalboard I bought online.

I customized it for my use, which included replacing two locking jacks with gold jacks and adding a gold locking jack and adding five nickel jacks for switching, other than the small drill holes for cables it was...stock.

This, dear sir, is absolutly stunning. Uber clean and tidy. My hat is off to you.
Mesa ROV combo
Ibanez 1451 black
Ibanez 827 qm premium desert red
Boss gt 10
and it's cold in Iceland ; )

http://www.myspace.com/angist

User avatar
elvis
Donating Member
Posts: 2569
Joined: Thu Oct 15, 2009 1:30 pm
Location: San Francisco Bay Area, CA

Re: Post your pedalboard

Post by elvis » Sat Mar 31, 2012 12:26 am

My previous board:

Image

My current board (Trying to move everything into the rack)

Image
Mini Rectifier blue LED
Recto 2x12 Vertical
Recto 2x12 Wedge

TremoJem
Mark III
Posts: 421
Joined: Wed Mar 02, 2011 11:42 am

Re: Post your pedalboard

Post by TremoJem » Mon Apr 02, 2012 5:51 am

Thanks Geiri, I really appreciate that. Maybe I will post a pic of my entire rig just for fun.
Ibanez Jem 7VWH > Bad Horsie II Wah > Radial JX-2 ABY Switch > Two Tremoverb Combos
Mesa Channel Switch DTDP & Mesa FXLoop Switch DTDP
TC Electronic G-Major & Ernie Ball Volume Pedal & Behringer FCB 1010
Assorted Tubes
Series FXLoop

TremoJem
Mark III
Posts: 421
Joined: Wed Mar 02, 2011 11:42 am

Re: Post your pedalboard

Post by TremoJem » Mon Apr 02, 2012 5:56 am

Oh what the hell, here goes:

Image
Ibanez Jem 7VWH > Bad Horsie II Wah > Radial JX-2 ABY Switch > Two Tremoverb Combos
Mesa Channel Switch DTDP & Mesa FXLoop Switch DTDP
TC Electronic G-Major & Ernie Ball Volume Pedal & Behringer FCB 1010
Assorted Tubes
Series FXLoop

Release
Mark I
Posts: 33
Joined: Fri Aug 26, 2011 7:03 pm

Re: Post your pedalboard

Post by Release » Mon Apr 02, 2012 12:38 pm

Image
(The Mesa switch is just a basic channel switch with a custom graphic)
Image
Image

... and I just put a new custom label I designed on the Deja Vibe....

Image

User avatar
jpdennis
Mark III
Posts: 329
Joined: Wed Feb 10, 2010 12:07 pm
Location: Marysville, California, USA
Contact:

Re: Post your pedalboard

Post by jpdennis » Mon Apr 02, 2012 11:59 pm

Here is the one I use with various stage bands;

Image

Here is a quick setup board (literally) I use at jam sessions and the like;

Image

Dennis
Mark III no mark w Randy's initials & some IIc+ parts
50 Caliber (6BQ5) 4xEL84
Heartbreaker
Fender 75
Acoustic 165

1970 LPGT
1981 The Strat
1983 GZ-300
1983 (Elite Neck)/2001 FrankenStrat
1990 Firebird
more guitars, so little characters

Geiri
Donating Member
Posts: 614
Joined: Thu Jan 18, 2007 6:44 pm
Location: Kópavogur Iceland

Re: Post your pedalboard

Post by Geiri » Tue Apr 03, 2012 4:47 pm

TremoJem wrote:Oh what the hell, here goes:

Image
Now that's cool set up. I have my self a simpler version of what you are doing. That is I have 1 rectoverb combo and the boss gt 10. It's more than enough for my needs and honest to God out of my 6 previous mesas and various gear this is my favorite set up. And while I'm on it my favorite amp bar none.
Mesa ROV combo
Ibanez 1451 black
Ibanez 827 qm premium desert red
Boss gt 10
and it's cold in Iceland ; )

http://www.myspace.com/angist

TremoJem
Mark III
Posts: 421
Joined: Wed Mar 02, 2011 11:42 am

Re: Post your pedalboard

Post by TremoJem » Wed Apr 04, 2012 5:30 am

Thanks Geiri.

I am looking for another Marshall 1960B.

I would then put one Tremoverb on each 4x12.

I also want to load them with V30s.

I might even consider an X Pattern of G12H-30 and the V30s.

Hopefully I will find another Marshall soon.

Thanks again.
Ibanez Jem 7VWH > Bad Horsie II Wah > Radial JX-2 ABY Switch > Two Tremoverb Combos
Mesa Channel Switch DTDP & Mesa FXLoop Switch DTDP
TC Electronic G-Major & Ernie Ball Volume Pedal & Behringer FCB 1010
Assorted Tubes
Series FXLoop

Geiri
Donating Member
Posts: 614
Joined: Thu Jan 18, 2007 6:44 pm
Location: Kópavogur Iceland

Re: Post your pedalboard

Post by Geiri » Wed Apr 04, 2012 6:38 pm

TremoJem wrote:Thanks Geiri.

I am looking for another Marshall 1960B.

I would then put one Tremoverb on each 4x12.

I also want to load them with V30s.

I might even consider an X Pattern of G12H-30 and the V30s.

Hopefully I will find another Marshall soon.

Thanks again.
How does the trem sound through the marshall ?
Mesa ROV combo
Ibanez 1451 black
Ibanez 827 qm premium desert red
Boss gt 10
and it's cold in Iceland ; )

http://www.myspace.com/angist

User avatar
elvis
Donating Member
Posts: 2569
Joined: Thu Oct 15, 2009 1:30 pm
Location: San Francisco Bay Area, CA

Re: Post your pedalboard

Post by elvis » Wed Apr 04, 2012 10:55 pm

I did an X-pattern of V30 and G12T-75 in a 4x12 and I really liked it. You might also try V30 and C90, another favorite combination.
Mini Rectifier blue LED
Recto 2x12 Vertical
Recto 2x12 Wedge

Post Reply