Tone settings on 2nd channel of the LSS 112

[Jared Purdy]

I'm curious to hear from of other users of this amp what tone setting you use on the 2nd channel - for straight ahead blues and classic rock?? Cheers!

 

[Vogelsong]

drive 9-11, Gain around 12. treble 2 or higher to taste, mid 9-11 bass 3 or lower, presence 12 or higher, master at 10, output at 1 at 5watts.

Oops, I meant bass at 9 or lower.

 

[screamingdaisy]

Drive - 9:00
Gain - 12:00
Treble - 1:00-2:00
Mids - 9:00-10:00
Bass - 9:30 or less
Pres - 1:00 (or to taste)
Vol - 10:00

Switch set to thicker.

IMO, the key to getting the best results with the effects loop engaged is to keep the channel master of the loudest channel set between 9:00 and 10:00 and turning the quieter channel up to balance it.

 

[Jared Purdy]

We're all very close here, but as we know, slight changes can and do make a difference.

 

[Jared Purdy]

Drive - 9:00
Gain - 12:00
Treble - 1:00-2:00
Mids - 9:00-10:00
Bass - 9:30 or less
Pres - 1:00 (or to taste)
Vol - 10:00

Switch set to thicker.

IMO, the key to getting the best results with the effects loop engaged is to keep the channel master of the loudest channel set between 9:00 and 10:00 and turning the quieter channel up to balance it.

Thanks, I don't run anything through the effects loop, so I generally keep it set to hard by pass.