dutchburns1
New member
- Joined
- Dec 9, 2019
- Messages
- 1
- Reaction score
- 0
I am currently working on a midi controlled pedalboard centered around the RJM PBC10 and looking for the best way to go about switching amp channels from the PBC. I was going to run a 25 foot snake cable to my pedalboard with my FX loop, amp in, power, and ft switch. I originally planned on sending a midi out cable from the PBC to the midi input on the MarkV, but realized the MarkV had an 8pin for its foot switch and the PBC had 5pin output. I am fairly new to midi control and would not how to go about solving this. My other plan was to run a split TS and TR to TRS Y cable from the Ext switch input for channel 2 and 3 on the Amp into the TRS input of the PBC for foot switch 1/2. Although this is slightly less ideal for me since I would not be given access to the reverb, eq, fx loop, solo, and mute from the original, clunky foot switch (however I use those options very rarely-- if at all), the Y split cable seemed like it would be easier . Any recommendations on what would be the easiest/cheapest?