I have searhed for this and there is different problems with the loop (understanding it at least).. I have put i a lo impedans pedal (BossFV-30L) to control the overall
volume of the beast but it won't turn all the way down. It dos the same with a Boss FV-500H - high impedance.. Hmm - strange...
Anybody seen a list of tubes, for the Triaxis, with description of characteristics/vendor etc.?
I miss a tight sound with a good punch/response to it.
Any recommendations vendor/type?
But how to set the Triaxis to Midi-Omni (listen to all channels) ?
Programs may show 1 when I change from 1-2-3-4 etc. I remember last time I used the Tri i think this program counter also showed the same as the preset number. Now it stays on 1 and don't know how to change if it should be...
Arghhhhhhhh... Using to much time setting things up instead of playing. The simplest thing here should be to have the Axe controlling the Triaxis.
I set the midi on Axe to 1.
I set the Triaxis midi to 1.
I put a cable from Axe Midi Through/out to midi input on Triaxis.
When I change preset on...
I have read all messages and wonder why a lot of you actually use a drive in front of MarkV:25.
I bought it for the sound of the chrunch and clean tone. I do have a problem because I can only switch between ch1/ch2 and not clean/chrunch so I'm also trying to solve this by (also reading here)...
On other gear (Axe FX2) the send/return has to be chosen in setup and if so there needs to be a signal way (have to connect something from send to return)
How dos it work on this amp? is send/return mixed in parrallel to the signal in the amp or dos the connection open up the signal chain and...
I have recently received the Mark V:25 and this is an easy amp to tweak I must say. Hard to get a really bad sound..
Questions:
1. What is the difference in using the Cap Clone output compared to effect send? I cannot hear any difference...
I'm using effect send or Cap Clone to send to Axe FX2...