Pillsbury Dough Boy
Member
- Joined
- Nov 10, 2015
- Messages
- 6
- Reaction score
- 0
Hej Folks
Can anyone shed light on this issue I am have with my 1x12 LSS. The amp is distorting quite badly under load on a clean sound ( decent gigging volume ) on channel 1 when using wet effects via send and return. Channel 2 is unaffected and dry effects going through the front of the amp are fine. I disconnected the s&r cables and the problem went away, so I am thinking it is an issue with the send and return circuit or of there is a valve connected to that part of the amp. I am sure there is no issue withe the effects pedals or cables being used for the s&r,
Anyone experienced this before? Is it a common issue?
Any help or advice would be welcome.
Cheers
PDB
Can anyone shed light on this issue I am have with my 1x12 LSS. The amp is distorting quite badly under load on a clean sound ( decent gigging volume ) on channel 1 when using wet effects via send and return. Channel 2 is unaffected and dry effects going through the front of the amp are fine. I disconnected the s&r cables and the problem went away, so I am thinking it is an issue with the send and return circuit or of there is a valve connected to that part of the amp. I am sure there is no issue withe the effects pedals or cables being used for the s&r,
Anyone experienced this before? Is it a common issue?
Any help or advice would be welcome.
Cheers
PDB