I got a Fillmore 50 head a couple of weeks ago. I love the amp. It's exactly what I hoped it would be. The only thing that is disappointing is the reverb as you mentioned. Having read your post earlier I tried a few different 12AX7, 12AT7 and one 12AU7 in V5 (V5A is Reverb Return and V5B is...
I don't have any experience with the Lone Star or Express amps, but like you I have always wanted a Fender like, rich clean tone but also the ability to get to light (or more) breakup at much lower decibel levels (for home use and practice) than can be achieved even in the Deluxe Reverb or...
I want to thank everyone for your kind replies to this thread. My initial inquiry was meant to seek answers regarding the potential possibility of output tube breakup as an additional tone "tool" to use in my Mark III, and thanks to the many helpful replies to this thread and after speaking...
Excellent points all around. When I made my initial post I didn't fully understand how the output section was designed to work in these amps. I was aware that they were designed to create a full range of tube saturated breakup, all the way up to insane levels of extreme metal tones, all from...
Excellent points about the EV 250 watt speaker, etc. And yes, I agree that driving that speaker to breakup, and possible the output section of my particular Mark III, could be dangerous to any living thing within the amp's "blast zone" ha ha.
On some other master volume amps such as Marshall it's possible to achieve:
a) preamp breakup with the preamp (Volume/Gain) turned up higher and the power amp turned down lower and running "clean"
b) poweramp breakupi with the preamp set lower and not breaking up but with the master volume...
Which version of Mark III do you have (ie what color stripe)? I can't get poweramp overdrive even with the Master on 10, so hearing you are getting it on 4 or 5 makes me think you may have a different version of Mark III. Running the Master on 4 or 5 means you are only driving the output tubes...
I have tried with the Master on 10, Volume on 10 in Rhythm 1/Clean and with my guitar volume on 10 also and never got any output tube saturation/breakup. I have even gone up to 8 in Rhythm 2 but never got anything different than the preamp breakup that was present at lower settings of the...
I assume you are referring to preamp distortion? I posted an inquiry regarding output tube saturation and would love your input on that if you have any.
As for the bass control, remember the effectiveness of both bass and mid are dependent upon the setting of treble. The higher treble is set...
Thanks Fernando. I agree that the Boogie preamp breakup is better than that of many other amps, I still want to tap into the different tonal characteristics of saturating the output tubes. Having pushed the amp almost as hard as it will go in rhythm 2 (8 on Volume with Master on 10) and...