The Magic Hoof
Well-known member
- Joined
- Dec 21, 2007
- Messages
- 150
- Reaction score
- 0
I'm not sure how this would work seeing as the only pedals I've seen feed one input to two outputs, because with my setup, it won't work properly.
I want to run two preamps into a single 295 power amp. From the power amp, I'm running a single speaker cable from the 8ohm output on the 295 into a single cab, which is the 8hm input on the back of it. I could easily run a pedal and do two amps, but that would mean I'd need two preamps, two poweramps, and two cabs (or two heads and two cabs). So with my setup I don't think it's possible.
Now here is where it gets even more complicated: I'm running a parametric EQ after my preamps and I'd like to be able to use it after each preamp with a single switch of a button.
Your guess about how to set all of this up to where I can switch preamps w/parametric EQ going into a single power amp, single speaker cable and single cab is as good as mine.
I want to run two preamps into a single 295 power amp. From the power amp, I'm running a single speaker cable from the 8ohm output on the 295 into a single cab, which is the 8hm input on the back of it. I could easily run a pedal and do two amps, but that would mean I'd need two preamps, two poweramps, and two cabs (or two heads and two cabs). So with my setup I don't think it's possible.
Now here is where it gets even more complicated: I'm running a parametric EQ after my preamps and I'd like to be able to use it after each preamp with a single switch of a button.
Your guess about how to set all of this up to where I can switch preamps w/parametric EQ going into a single power amp, single speaker cable and single cab is as good as mine.