Troubleshoot: Triaxis dead mode

The Boogie Board

Help Support The Boogie Board:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
X

xcpointx

Well-known member
Joined
Aug 19, 2005
Messages
60
Reaction score
0
My TA has been reliable and problem free for over 5 years.
Today I powered on and found I had no sound coming from LD1 RED.
Ok, more precisely it sounds like I'm playing a clean channel with very low gain. It's like I have the vol control rolled all the way down on my guitar.

I have changed all 5 tubes with no effect.

Please give me some ideas :)
 
That mode has it's own board - maybe the connections to the board got messed up.
 
I had the same thing happen on mine (with the recto mod) Several years ago, I think it was a bad resistor on the tube related to that mode. refer it to a qualified service tech.
 
You dont think it has anything to do with those 'vactrol' things that I have heard about dying on the TA?

voltage controlled resistors? or light dependent resistors?
 
LDRs seem to be the culprit for a lot of TA act-ups, yeah... Maybe the LDR that controls the LD1 red board is dead?

I were you I take it to the tech and mention that assumption.
 

Similar threads

P
Triaxis help
Replies
0
Views
513
Pete1340
P
RJz347
Connecting a Triaxis to a line 6 Helix Rack unit
Replies
4
Views
724
RJz347
RJz347
TheRumble
Lonestar Classic dead?
Replies
11
Views
1K
bandit2013
bandit2013
rsilverst
Mesa Maverick tone tweaks - Lead Channel
Replies
2
Views
353
tbonesullivan
T
S
Badlander mods?
2 3 4
Replies
65
Views
5K
mace
M

Latest posts

Back
Top