The Boogie Board

Discussion Forum for Mesa Boogie Products
It is currently Fri Nov 16, 2018 1:52 pm

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 10 posts ] 
Author Message
PostPosted: Fri May 03, 2013 4:10 am 
Offline
Mark II
User avatar

Joined: Sun Jul 15, 2012 12:23 pm
Posts: 108
Location: Netherlands
My Edge-pro 2 is a piece of crap and is worn out after 10 years of "service". Strings keep snapping at the bridge, saddles keep breaking, money is flowing away and guitar horror...

Does anybody have some experience in replacing this (or other Ibanez) bridge?
I can't find solid info on the interwebs. Some say any floyd-style bridge with the right screw spacing will fit. Others say only Ibanez bridges will fit. :?

Guitar is a 2003 Ibanez RG320


Top
 Profile  
 
PostPosted: Fri May 03, 2013 11:32 am 
Offline
Mark III
User avatar

Joined: Mon Jan 14, 2013 4:13 pm
Posts: 252
Location: Chicago, IL
Have you tried taking the guitar to a tech to smooth out the saddles to remove any burrs? What kind of strings do you use? Do you change them often? How often do you play?

I ask because you may not need a new bridge

_________________
Mesa Boogie 2001 3 Channel Dual Rectifier
Ampeg 4x12 Cab
Gibson 2006 Les Paul Studio
https://soundcloud.com/authoritydrive


Top
 Profile  
 
PostPosted: Fri May 03, 2013 3:13 pm 
Offline
Mark II
User avatar

Joined: Sun Jul 15, 2012 12:23 pm
Posts: 108
Location: Netherlands
I have smoothed out the saddles myself many times... But the saddles are dented from the little locking blocks. This is the cause of the strings breaking. The strings on it are usually a hybrid Ernie Ball Slinky set (52 - 10).

Since this Ibanez is not my main guitar I don't play it very much. I also don't play it very much because of the string breakage. I want this guitar to be my backup when we start gigging again this summer. For that I need a working and reliable floyd.


Top
 Profile  
 
PostPosted: Sat May 04, 2013 1:15 am 
Offline
Mark III
User avatar

Joined: Sun Dec 26, 2010 10:26 pm
Posts: 215
Location: Louisville, KY
Gnarkill3k6 wrote:
Some say any floyd-style bridge with the right screw spacing will fit. Others say only Ibanez bridges will fit.

An Edge tremolo can only be replaced with another Edge.
If it was a Ibanez LO-TRS, you'd be able to throw in a Floyd Rose Original or Floyd Rose LO PRO (same thing as LO-TRS).

_________________
Quad 295, Studio Pre 50/50, 50Cal+, Racktifier
4x12 halfbacks- 3 Top, 3 Bottom & 3 Road Ready
Lefty
Jackson- KV2, DKA
Gibson- Faded Flying V & SG, SG-1, SGJ
Dean- Z79
Schecter- Hellraiser C7
BC Rich- Mockingbird ST
Ibanez- RG470, RG450, RG370DX


Top
 Profile  
 
PostPosted: Sat May 04, 2013 4:33 am 
Offline
Mark II
User avatar

Joined: Mon Jan 14, 2013 3:00 am
Posts: 56
maybe the gotoh/wilkinson floyd, but you need to check all the sizes first.
I had the same problem with an old original floyd, and I simply changed all the saddles, not the whole bridge.

_________________
AMPS
Marshall
1987x Plexi modified
9001 valve preamp
8008 power amp
1936 cab
Fender
Champion 110
Mesa boogie
mark IIb 60/100

GUITARS
custom made superstrat
Kramer pacer custom USA
Jolana Les Paul
Ibanez SA
Custom made lap steel guitar
Crafter acoustic


Top
 Profile  
 
PostPosted: Sat May 04, 2013 6:28 am 
Offline
Mark II
User avatar

Joined: Sun Jul 15, 2012 12:23 pm
Posts: 108
Location: Netherlands
@ MichaelC4
I was a bit afraid of that... I really don't like the cheap metal Ibanez uses for these bridges.

@ thecek
Saddles cost me round €22 a piece (x6 = €132 -> $173), and that way I'm still stuck with the same weak metal. I figured a new better bridge was the way to go. But maybe the new (improved?) saddles are the only option.

Not sure what to do... new saddles or take a risk of a 3rd party bridge that maybe don't fit.


Top
 Profile  
 
PostPosted: Sat May 04, 2013 9:19 am 
Offline
Mark II
User avatar

Joined: Mon Jan 14, 2013 3:00 am
Posts: 56
@ thecek
Saddles cost me round €22 a piece (x6 = €132 -> $173), and that way I'm still stuck with the same weak metal. I figured a new better bridge was the way to go. But maybe the new (improved?) saddles are the only option.
[/quote]

oh, I had forgotten that the edge proII saddles are totally different from the saddles of other FR system.
so, if you're still interested in changing your bridge, I've found this guide, and it tells that ibanez edge proII can be replaced only with another edge proII or with an original floyd rose.
take a look here, it's in italian but there are a lot of pictures..you have to search this "Original Floyd Rose su scavo Ibanez Edge-Pro/Edge-Pro II: COMPATIBILE"..
http://www.guitarmigi.it/_Tips/CompFloy ... yd_edgepro

_________________
AMPS
Marshall
1987x Plexi modified
9001 valve preamp
8008 power amp
1936 cab
Fender
Champion 110
Mesa boogie
mark IIb 60/100

GUITARS
custom made superstrat
Kramer pacer custom USA
Jolana Les Paul
Ibanez SA
Custom made lap steel guitar
Crafter acoustic


Top
 Profile  
 
PostPosted: Sun May 05, 2013 3:50 am 
Offline
Mark II
User avatar

Joined: Sun Jul 15, 2012 12:23 pm
Posts: 108
Location: Netherlands
Thank you for that site,very useful!

But I'm not convinced my bridge is on there... so I took a pic myself:
Image

As you can see at the low E saddle, it's really a quality bridge (NOT!) as the dark chrome finish came of after just 2 years of playing.
I put the strings so far out because of the string breakage. This way they break later... and ruin the saddles possibly even more. But at least it's home-playable now.


Top
 Profile  
 
PostPosted: Fri May 17, 2013 10:31 pm 
Offline
Donating Member
User avatar

Joined: Thu Oct 15, 2009 1:30 pm
Posts: 2545
Location: San Francisco Bay Area, CA
Weird. I've been playing Edge trems for almost 25 years. I've had 7 or 8 of them, and never had any problems. They stay in tune much better than any other trem I've used, and I like the way they sit flush much more than the Floyd.

_________________
Mini Rectifier blue LED
2x Recto 2x12 Vertical
Recto 2x12 Wedge


Top
 Profile  
 
PostPosted: Tue May 21, 2013 1:26 am 
Offline
Mark II
User avatar

Joined: Sun Jul 15, 2012 12:23 pm
Posts: 108
Location: Netherlands
YMMV I guess...


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group