Voodoo Lab GCX problem

[SilviuAdd]

Ok so I was trying some new wiring with my Mesa Triaxis some pedals and the Voodoo Lab GCX and I don't know what happened but a big flame came from the back of the rack and after that I noticed that everything was fine except the GCX. If I try to switch it on it won't work. So my question is this: Did I blow it up or just the adapter is blown? If I send it to warranty they will fix it? Sorry for my bad english. I would be very grateful if you could help me. Have a nice day!

 

[JMMP]

http://www.voodoolab.com/forum/viewforum.php?f=9&sid=d26a8eedafb539278633f0828852d356

I would post this same question there.

Did the flame shoot out of the gcx, or out of the power supply? That would give a hint as to which one was effected. You might try removing the top of the unit (should be a couple screws on the side I think) and just look around inside (but don't touch). Something may visually be wrong that could answer your question.

 

[SilviuAdd]

Thank you very much! I believe that the flame came from the adapter. Have a great day!