IXIStreakIXI
Active member
- Joined
- Jun 17, 2008
- Messages
- 32
- Reaction score
- 0
Alright, before you bite my head off, I did some homework and EMG sells their own 25k concentric pots [EMG actives require 25K audio taper pots to work correctly] I plan on buying 2 concentric pots and one of EMG's signal boosters. My axe has 3 drilled holes and I don't plan on drilling any more. I also did the 18V mod so there's so much going on already. What I was wondering is, how would I wire the two concentric pots, both being Volume on top, tone on the bottom for each pickup leaving the third hole for the signal booster? [Is this even possible?]