How to wire up the reverb tank on a LSC RM?

The Boogie Board

Help Support The Boogie Board:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Vectorfire

Member
Joined
Oct 19, 2018
Messages
11
Reaction score
0
The input and output is not labelled on the chassis or on the schematic in the manual. :?:
I'm assuming that the shielded cable is the return from the tank, where the shielded is the send. Would this be correct?

Any input would be greatly appreciated,
Thank you all!

Chassis Connections
https://drive.google.com/open?id=1lcVqRX1mxkNogwFaqQoMMutiXtxI2Wyg

Manual Schematic
https://drive.google.com/open?id=1OFsXdTfde49wUfsBwvDoqJ4HQK_4yr_H

Cables from tank
https://drive.google.com/open?id=1EBFNJQKi6UoPMQXz61Q7peNzWJfK4mew
 
Back
Top