configurations of multiple Mesa-Boogie MK1.2.3.4

The Boogie Board

Help Support The Boogie Board:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

domglop78

Well-known member
Joined
Dec 7, 2014
Messages
67
Reaction score
2
Location
France
Hello
I have been reading for a while now all that can be said about mesa boogie mark 1, 2,3,4,5.
These amps are of good quality but there is a sorely lack of documentation for the connections and possibilities offered ...
Could someone explain to me clearly with a drawing the possible configurations with the send / return of a mark 2 or 3?
Not to mention the possible connections on the jacks in the chassis ....
I have the impression while reading, that everyone knows everything, and that it would be just a story of "specialists" and well not of novices like me still trying to know the functionalities of MB. I have a MK 4B and I have no worries because the doc is very well done. On my mark2B I'm still struggling to know which jack for which connection ....
frankly it will be good for a lot of people ..... and even those who already know everything .....
Thank you for your feedback on this subject ..... and don't tell me to look in this forum.... I haven't seen any schematics.......
take care of yourself
dom
 
When Boogie was still making the Mark II, each one was custom made for the customer, so we would need a picture of your amp first. The manuals back then were just a general decription, not a detailed manual with pictures. There's more than likely a couple inputs under the chassis that may need you to take the amp apart to see what they do. Any schematic would be suspect due to changes, mislabeled or added/deleted parts. Back then, Boogie would constantly improve and update their amps

In other words, there's no simple answer.
 
Back
Top