JP2c sick

Non Mesa Boogie amp discussion

Moderators: Guitarzan, Grandor, ned

Post Reply
Bottle Rocket
Posts: 1
Joined: Mon Aug 09, 2021 7:44 am

JP2c sick

Post by Satchur8 » Mon Aug 09, 2021 7:52 am

Hi everyone in Boogie Land, it's my 1st time here and I'm desperately seeking Susan! LOL just kidding! I'm desperately seeking for advice if anyone has had this issue with the JP2c.
Bought this amp after going from Mesa Strategy 500 back in the 90s, then to Marshall JCM800, then to Marshall JVM410HJS, then back to Boogie JP2c. I really thought I had found the holy grail of tone, then 5 years later it's dying on me. I guess 5 years was a good run but I'm reluctant to sell it...but if I have to, I will....

It only happens in Channel 3, but not instantly and not all the time. Intermittent faults are the hardest to track I know. I bought it new in 2016 so the 5 year warranty expires in Dec. Unfortunately I can't get it to the distributor due to COVID restrictions as i don't trust couriers with my PreCiOus!
It seems to 'warm up' then play up. The sound totally sounds like the amp is farting. Literally the sound will flutter off then die to zero, ONLY IN CHANNEL 3 MODE, usually exacerbated if I flick on the Shred switch also happens faster. I did take it to a recommended repairer and he found nothing and still charged my $100 for time.He said it's not the power tubes, but i did change the preamp tubes. It seemed ok for a while and now it's back to haunt me! I spoke with the dealer and they say it's weird, because if anything were to go wrong in the amp it usually happens in the 1st 18months of use not 5 years later. Said it's definitely not the tubes ! Sad that I can only use 2 of the 3 channels now, but I prefer Ch 3 hi gain mostly to solo.
Luckily I'm not gigging till Covid settles....

Has anyone had a similar issue with the JP2c?
Thanks for any advice....

Mark III
Posts: 192
Joined: Wed Apr 20, 2016 6:04 pm

Post by Thaymz » Wed Dec 29, 2021 5:09 am

Hi Joe

Did you have any luck finding out what is causing this problem?

Post Reply