Rectoverb 25 - How to get the Reverb Tank out

Discussion area for Single, Dual and Trip Rectifers

Moderators: Guitarzan, Grandor, ned, Platypus

Post Reply
User avatar
TheRazMeister
Mark IV
Posts: 584
Joined: Fri Apr 08, 2005 10:08 am
Location: Richmond VA

Rectoverb 25 - How to get the Reverb Tank out

Post by TheRazMeister » Thu Jun 14, 2018 7:29 pm

Hey guys, just picked up a rec 25 and the reverb doesn't work. Suggestions were to check the reverb tank and check the V6 tube.
Didn't have a good 12AX7 laying around so I thought I'd see if the reverb was connected correctly.
Having a heck of a time trying to get it out...any tips?
Raz
PRS Custom 24- LP Standard - Ibanez AR2000 -Guild X88
Mini-Rec Head - Rectoverb 25 Combo - Marshall DSL50 - Vox AD60VTX

User avatar
TheRazMeister
Mark IV
Posts: 584
Joined: Fri Apr 08, 2005 10:08 am
Location: Richmond VA

Re: Rectoverb 25 - How to get the Reverb Tank out

Post by TheRazMeister » Tue Jun 19, 2018 9:49 am

Hey guys...little surprised at the lack of responses???
But I was able to work the tank out (had to separate it from the plywood backing.
One of the wires had gotten loose and had to be re-soldered.
All is good!!!
PRS Custom 24- LP Standard - Ibanez AR2000 -Guild X88
Mini-Rec Head - Rectoverb 25 Combo - Marshall DSL50 - Vox AD60VTX

Post Reply