I didn't know that a stock 50/50 would do it for bass too or its a modified 50/50 for bass?hellfleet said:Sorry everyone... Bassist content, beware! :twisted:
Ampeg SVP-Classic Preamp
Mesaboogie 50:50 Poweramp
SWR Workingmans 410 (Modified into 2x 4ohm stereo).
Simple but highly effective.
Show me your rack!
- Thread starter metalgarth
- Start date
Help Support The Boogie Board:
Very nice rig.
mboogman
Active member
- Joined
- Nov 3, 2011
- Messages
- 33
- Reaction score
- 0
Ok, I'll play along:
This is just before I took the VHT and GCX out. I'll be replacing the Studio Pre with a Mark III red stripe this week. All cabling and wiring done by me, including the 25' multi-pin control cable that carries my MIDI and control signals to and from the pedalboard.
This is just before I took the VHT and GCX out. I'll be replacing the Studio Pre with a Mark III red stripe this week. All cabling and wiring done by me, including the 25' multi-pin control cable that carries my MIDI and control signals to and from the pedalboard.
dbone
Well-known member
Nice rigs guys they look sweet!
Hellraiser6502
Member
- Joined
- Jun 17, 2011
- Messages
- 16
- Reaction score
- 0
Wow. Some really great rigs here.
I've never been a 'RIG GUY'...in fact 'Rigs' have always intimidated me but last year I finally decided to experiment a little.
The Axe FX Ultra is what prompted it.....just a relatively simple setup.
I also have a Mark III (Blue Stripe) and a Mark IV (bottom of rack) with 4 old skool 4x12 metal grill cabs (the REALLY HEAVY ones!) which were what I'd used for the last 15 + years.
Anyway my humble 'Rig'
I've never been a 'RIG GUY'...in fact 'Rigs' have always intimidated me but last year I finally decided to experiment a little.
The Axe FX Ultra is what prompted it.....just a relatively simple setup.
I also have a Mark III (Blue Stripe) and a Mark IV (bottom of rack) with 4 old skool 4x12 metal grill cabs (the REALLY HEAVY ones!) which were what I'd used for the last 15 + years.
Anyway my humble 'Rig'
mboogman
Active member
- Joined
- Nov 3, 2011
- Messages
- 33
- Reaction score
- 0
Hellraiser6502 said:Wow. Some really great rigs here.
I've never been a 'RIG GUY'...in fact 'Rigs' have always intimidated me but last year I finally decided to experiment a little.
The Axe FX Ultra is what prompted it.....just a relatively simple setup.
I also have a Mark III (Blue Stripe) and a Mark IV (bottom of rack) with 4 old skool 4x12 metal grill cabs (the REALLY HEAVY ones!) which were what I'd used for the last 15 + years.
Anyway my humble 'Rig'
Looks like you're doing some kind of W/D setup? That's a pretty good looking rig. How nicely does the Axe play with the rest of the rig?
bjoneill74
Well-known member
*updated.. - TC D-Two + Mesa Mark V and some stompers
bluestometal
Well-known member
- Joined
- Nov 21, 2011
- Messages
- 157
- Reaction score
- 0
Doing their magic.
Greetings from Finland!
Here's my rack:
Thon case 8-unit rack:
TC G-major (wired stereo in the Rocktron)
Rocktron Patchmate Loop8
2 unit pedal shelf (pedals wired to Rocktron):
EVH Phase90
Fulltone OCD
Xotic BB Preamp
EHX Nano booster
Boss NS-2
EHX Memory Boy
MESA Rectifier preamp
MESA 2:50
MESA Rectifier cabinet
Gibson LP
Warwick Rockcase pedalboard:
Behringer FCB-1010 MIDI pedal
Dunlop Jimi Hendrix wah JH-1
Boss TU-2
bluestometal
Well-known member
- Joined
- Nov 21, 2011
- Messages
- 157
- Reaction score
- 0
Triaxstasy
Well-known member
RectoStudioGuy
Well-known member
Great set-upTriaxstasy said:
Nocki
Well-known member
May rack today... Changed from a 10HE witch palmer and wireless set to this...
Does anyone know if I can use only half (one side) of the 395 by removing the fuse wich says "Cathodes A" or B?
Or is there any other safe way?
Thank you!
benjamin801
Well-known member
I'm not sure if y'all are ready for the intimidating, Death Star-like visage of my rack, but here goes:
The doilies are aftermarket. You can't have any.
The doilies are aftermarket. You can't have any.
