Wanted output transformer from Nomad 45 or JCM JMP800 50watt

Post Boogies for sale and wanted.
No dealers please.

Moderators: Grandor, ned, Guitarzan, Platypus

Post Reply
j.micka@outlook.com
Bottle Rocket
Posts: 6
Joined: Wed Oct 09, 2019 7:04 pm

Wanted output transformer from Nomad 45 or JCM JMP800 50watt

Post by j.micka@outlook.com » Sun Jun 07, 2020 2:57 pm

Hi guys/gals,
Needed an output transformer from a nomad 45 Mesa Boogie.
Looks like its possible also from a JMP JCM800 50 watt.
Its for 4 x EL84 tubes
Please PM or email
Must be reasonable please.
Thanks for looking,
John

MesaBoogie PN:562050 EIA606-002 EIA-606-002

Possible replacement
P-TM050 40-17026


Also there may be other part number for these 50 watt transformers.

woodbutcher65
Mark III
Posts: 267
Joined: Fri May 04, 2018 10:36 pm

Re: Wanted output transformer from Nomad 45 or JCM JMP800 50watt

Post by woodbutcher65 » Sun Jun 07, 2020 5:21 pm

I have one that came out of a Rocket 44. It's 4x EL84 tubes. It's in perfect working order. Would that interest you?

j.micka@outlook.com
Bottle Rocket
Posts: 6
Joined: Wed Oct 09, 2019 7:04 pm

Re: Wanted output transformer from Nomad 45 or JCM JMP800 50watt

Post by j.micka@outlook.com » Sun Jun 07, 2020 5:31 pm

I found one.
It is a Marshall 50w.
When installed I get a huge hum from the speaker.
Guessing a mismatch? I dont know.
If thats the case I still need a, outut transformer from a Nomad 45.
Yes the Rocket 44 is the same output transformer, yes for 4 x EL84

j.micka@outlook.com
Bottle Rocket
Posts: 6
Joined: Wed Oct 09, 2019 7:04 pm

Re: Wanted output transformer from Nomad 45 or JCM JMP800 50watt

Post by j.micka@outlook.com » Sun Jun 28, 2020 4:39 pm

woodbutcher65 wrote:
Sun Jun 07, 2020 5:21 pm
I have one that came out of a Rocket 44. It's 4x EL84 tubes. It's in perfect working order. Would that interest you?
Hi woodbutcher65
I would gladly take that output transformer.

woodbutcher65
Mark III
Posts: 267
Joined: Fri May 04, 2018 10:36 pm

Re: Wanted output transformer from Nomad 45 or JCM JMP800 50watt

Post by woodbutcher65 » Sun Jun 28, 2020 7:27 pm

I found it! Yes, it's in great shape, known good. Part number 562050.

j.micka@outlook.com
Bottle Rocket
Posts: 6
Joined: Wed Oct 09, 2019 7:04 pm

Re: Wanted output transformer from Nomad 45 or JCM JMP800 50watt

Post by j.micka@outlook.com » Mon Jun 29, 2020 9:24 am

Hi woodbutcher65,
Sounds good, lets proceed to get payment to you.
PM some details.
Thank you,
John

Post Reply