TC-50 footswitch on RA-100 amp?

The Boogie Board

Help Support The Boogie Board:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Boogie man 31

New member
Joined
May 16, 2020
Messages
1
Reaction score
0
Hey guys, new here. I just bought an RA100 with an aftermarket footswitch that's faulty. Finding a replacement switch is proving to be difficult at best. In the meantime I found a triple Crown 50 switch. So my question is, could I use the triple 50 switch and just ignore the extra buttons?

Also I know mesa makes a replacent generic switch for the RA but I'm not a fan of how it looks. So that's a last resort.
 
Short answer is no. TC connects with a 6-pin DIN connector and the RA Footswitch is just a 1/4" TRS cable. If you're after the older style wedge shaped Footswitch, the electradyne uses the same switching as the RA so that Footswitch would work.
 
Back
Top