The Boogie Board

Discussion Forum for Mesa Boogie Products
It is currently Mon Jan 21, 2019 9:58 pm

All times are UTC - 6 hours [ DST ]

Post new topic Reply to topic  [ 2 posts ] 
Author Message
PostPosted: Wed Jul 26, 2017 2:44 pm 
Bottle Rocket

Joined: Wed Jul 26, 2017 2:17 pm
Posts: 1
I have looked at the RJM Music Mini Amp Gizmo & RJM Music Switch Gizmo Amplifier MIDI Interface as a way of controlling the Mark V 5-35 simultaneously with the effects in the MS-3 - via the MS-3 midi interface. While it looks like the Mini Amp Gizmo has the right connections I am just wondering anyone has done this with the Mesa Boogie Mark V 5-35 being “controlled (with a midi to latch translation)" by the Boss MS-3? As far as I can tell 4 button Mesa Boogie pedal has 5 active pins as follows:

1) +12V
2) Channel
3) EQ
4) Solo 1
5) Solo2

I think the Mini Amp Gizmo might do the trick if I can figure out what Midi CC messages need to be are sent from the MS-3 to the RJM device and then thru the 5 pin mesa Boogie provided cable to the amp, ultimately translating midi cc message to in to what i am guessing is basically a latch ON/OFF function to the amp. I have yet to call BOSS - but figured I would start at the amp end first to see if anyone has done such a configuration before..


PostPosted: Fri Jan 04, 2019 8:48 am 
Bottle Rocket

Joined: Tue Nov 06, 2018 4:19 am
Posts: 5
A bit easier
Boss ms-3 via midi -> midi interface -> Mark V ( using original footswitch cable )

Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 6 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 4 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group