Nice use for the Cab Clone: combo speaker extender

The Boogie Board

Help Support The Boogie Board:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

dlpasco

Well-known member
Boogie Supporter
Joined
Oct 8, 2012
Messages
712
Reaction score
33
Location
Seattle
I have a combo amp on top of a speaker set up for recording, just the way I like it.

I wanted to do some recording with one of my other amps and didn't really want to mess with the speaker/microphone setup, so I plugged the combo amp's speaker into the speaker output of a Cab Clone and my head into its input.

Amp's 4 Ohm output 1->Cab Clone->Combo amp speaker
Amp's 4 Ohm output 2->bottom speaker cabinet

It worked great. I'm not actually doing anything with the cab clone for this setup besides actually extending the cable but it seriously simplified switching out which amp I was using.
 
I've been playing around with my cab clone the last couple of days and have managed to get a really good sound out of it. I admit it took me half a day of experimenting with different levels and switch positions but it's actually really good.
 
Back
Top