Caster upgrade to fit Track-Loc plates

Bottle Rocket, V-1, V-twin.
Footcontrollers, midi switchers, amp switchers and Mesa Boogie products not covered.

Moderators: Guitarzan, Grandor, ned

Post Reply
mauijet
Bottle Rocket
Posts: 7
Joined: Sun Aug 03, 2014 4:04 pm

Caster upgrade to fit Track-Loc plates

Post by mauijet » Sun Aug 03, 2014 8:28 pm

Aloha All,

I spent many hours scouring the internet and finally found some rubber 3" casters with the right size swivel plate to fit the Mesa Track-Loc plates. I didn't want the hard phenolic wheels, which rattle and shake your tubes while rolling over crunchy parking lots, beat up sidewalks, and bumpy thresholds.
This may be a covered subject, but I didn't find anything searching this forum.

They are from Grainger, available online, and really improve the ride! Here's some pics:

Image

Image

Image

abe
Donating Member
Posts: 144
Joined: Wed Apr 18, 2007 8:49 pm
Location: Waterbury CT
Contact:

Re: Caster upgrade to fit Track-Loc plates

Post by abe » Sat Aug 09, 2014 9:12 pm

Nice. Do you have a part number or description? Also, are the Track Lock plates available for purchase anywhere else or are they patented by Mesa?
Mark V Combo
EVH 5150 iii 2*12 Combo
1987 Marshall Lead 12 Combo
Les Paul Studio
Peavey Wolfgang Special
Fender EVH Wolfgang Special Hardtail
Fender EVH Wolfgang Special Stealth
1987 Kramer Pacer
American Deluxe Strat
http://www.rivermud.com

xprod77
Bottle Rocket
Posts: 6
Joined: Tue Jun 02, 2009 10:56 pm

Re: Caster upgrade to fit Track-Loc plates

Post by xprod77 » Sat Jan 09, 2016 9:33 am

***Thread resurrection alert***

In the interest of saving the next person some valuable time. Here are the part details for the rubber caster from Grainger. It took me a bit to find it buried within the hundreds of different casters they have. The key is the plate size, which for Boogies, is 2 3/8" x 2 3/8".

Brand: Revvo
Item # 16D123
Mfr. Model # TSED 075 RN0D
UNSPSC # 31162701
Wheel diameter: 3"

https://www.grainger.com/product/REVVO- ... ter-16D123

dodger916
Donating Member
Posts: 2400
Joined: Wed Aug 29, 2007 5:18 pm
Location: Ithaca, NY...10 sq miles surrounded by reality!

Re: Caster upgrade to fit Track-Loc plates

Post by dodger916 » Sun Jan 10, 2016 4:59 pm

xprod77 wrote:***Thread resurrection alert***

In the interest of saving the next person some valuable time. Here are the part details for the rubber caster from Grainger. It took me a bit to find it buried within the hundreds of different casters they have. The key is the plate size, which for Boogies, is 2 3/8" x 2 3/8".

Brand: Revvo
Item # 16D123
Mfr. Model # TSED 075 RN0D
UNSPSC # 31162701
Wheel diameter: 3"

https://www.grainger.com/product/REVVO- ... ter-16D123
Nicely done. Thanks!

Mk IIA->C+ DRGX head "Cold Sweat" in GTS shell
1966 Fender Pro Reverb
DC-3 head
Orange Dual Terror
EVM loaded Thiele; MS-12 1/2 back
71 SG; 72 Tele; 76 White Strat; 77 LP Custom; 81 Goldtop; 05 Am Dlx Strat; 11 G0 plaintop

Image

MarkyMark
Bottle Rocket
Posts: 2
Joined: Thu Dec 07, 2017 12:29 pm
Location: England

Re: Caster upgrade to fit Track-Loc plates

Post by MarkyMark » Mon Jul 23, 2018 4:03 pm


notyalcer
Mark I
Posts: 22
Joined: Fri Apr 13, 2007 12:31 pm

Re: Caster upgrade to fit Track-Loc plates

Post by notyalcer » Sun Oct 07, 2018 10:02 am

Turns out Wallmart sells them now and not too expensive. Online only.

https://www.walmart.com/ip/REVVO-TSED-0 ... a/40786597

stephen sawall
Single Recto
Posts: 1323
Joined: Tue Nov 20, 2007 9:58 pm
Location: seattle wa usa

Re: Caster upgrade to fit Track-Loc plates

Post by stephen sawall » Mon Oct 08, 2018 8:02 am

Thanks
The fact that Stephen appears from nowhere, is sentenced to death in an emotional public trial without anyone interfering at all and is then altogether forgotten as if nothing happened, is already suspicious.

Post Reply