V-Twin saturation problem

The Boogie Board

Help Support The Boogie Board:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Virolin

New member
Joined
May 9, 2013
Messages
1
Reaction score
0
Hi, I have a Mesa B. V-Twin with 2 12AX7A tubes. I haven't use it for a long time, and now Iam facing this problem.

When I move the knobs gain & master till half path (12 O'clock) Iam start to notice a saturation noise, that becomes more evident when rise the gain or master a bit.

I had cleaned the pots, but that is not the problem. I have swiched & replace the tubes with other 12AX7 and the problem is still there.

Iam guessing what it could be. Capacitors seems Ok & in good shape. they are not inflated. Maybe some OpAmp? Maybe a bad soldering?.

Any help is welcome.

Thanks in advance.
 
I bought a v-twin pedal used and it was noisy like that. I just assumed it was common.
 

Latest posts

Back
Top