Footswitch mod

The Boogie Board

Help Support The Boogie Board:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Arek

Member
Joined
May 25, 2011
Messages
10
Reaction score
0
Location
Canada
I have Mesa Rectoverb 1 combo.
It has a footswitch with 3 buttons.
Only two have LED light.

How can I modify it so that there is LED for reverb?

I will poke around in near future, but just don't want to burn any circuits.

Also are considering adding another LED for Channel switch and make it light up green when on channel 1 and red when on channell 2, but the main thing is the LED for reverb.

Yes, I know I should hear the difference etc.,but I still want to ad that LED. It helps a load in real life.
 
Hi I am new here, but this is exactly what I was looking for.

Just picked up a used Recto2 (with the loop mod) from a good friend, but I really would like an LED indicator on the reverb channel. My thought was to open it up and look at how the other LED's are wired. I am thinking its in series with a resistor, but I am not the best with electronics (YET!).

Any help would be appreciated!

-dday
 
Back
Top