Footswitch Cable for a Dual Rectifier?

The Boogie Board

Help Support The Boogie Board:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
T

the_meridian

Active member
Joined
Jan 31, 2005
Messages
26
Reaction score
0
Location
NJ
Is this a MIDI cable? It looks like it's shaped the same, and it has 7-pins. The reason I ask, is because I want a longer footswitch cable, so I can put it in a snake and save some setup time.

The only other thing I can think of it being would be a DIN, but the plug looks a little big to be DIN.

Can anyone verifiy this for me? That 12ft footswitch cable ain't cutting it.

-Ant
 
You can order a 30ft. 7pin DIN cable from Mesa, your local mesa dealer will order it in for you. and you can connect the two cables together like an extension cord.

If you go to your local electronics store they may be able to make you a cable but from my experience finding a 7pin din connector was difficult. 5 8 and 9 are the most common.

Also, I believe MIDI is a 5pin DIN setup.
 

Similar threads

A
Mesa Nomad reverb problem
Replies
10
Views
918
ficelles
F
S
Two Channel Dual Rectifier Footswitch Help
Replies
2
Views
2K
tobiwern
T
P
Sold / Withdrawn Mesa Triaxis plus extras…
Replies
0
Views
571
pgool
P
b00g13mk2B
Express + Footswitch Options
Replies
2
Views
3K
minnemike
M
S
SOLD Mesa Boogie Mark III Red Stripe - Hardwood/Wicker - all footswitches - road case
Replies
0
Views
2K
sleeperaxe
S

Latest posts

Back
Top