Troubleshooting at Mesa Revolver Speaker Cabinet

The Boogie Board

Help Support The Boogie Board:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
P

Phoenician

Member
Joined
Jul 15, 2021
Messages
7
Reaction score
0
Location
Phoenix -- Biltmore
My new to me Revolver cabinet has a problem where it will drift of up fast mode and not come back down to slow. It’ll usually hang out on slow for a bit but soon enough it kicks to fast. Any thoughts on how to troubleshoot this issue in order to resolve it?
 
Vibration and electronic components don't go too well together. Could be as simple as a connector or lead issue.
I would look for dry joints if you are technical with a good grounding in electronics servicing otherwise, take it to a messa specialist.
 
user 84685 said:
Vibration and electronic components don't go too well together. Could be as simple as a connector or lead issue.
I would look for dry joints if you are technical with a good grounding in electronics servicing otherwise, take it to a messa specialist.
Click to expand...

I finally got around to taking it to an amp tech. Hopefully they can figure it out.
 

Similar threads

M
Maverick 4x10 Speaker Choices
Replies
4
Views
503
Monsta-Tone
M
B
Anyone have a DC-10 schematic?
Replies
14
Views
2K
brandx73
B
bandit2013
I just noticed that Mesa Boogie renamed the compact cabinet line as "Boogie" cabs.
Replies
10
Views
2K
bandit2013
bandit2013
R
88' Mark III Reverb
Replies
1
Views
809
Theresa
Theresa
bandit2013
Wanted to hear how the STR445 6L6GC tubes sounded in the TC50
Replies
0
Views
282
bandit2013
bandit2013

Latest posts

Back
Top