TC-50 footswitch on RA-100 amp?

Bottle Rocket, V-1, V-twin.
Footcontrollers, midi switchers, amp switchers and Mesa Boogie products not covered.

Moderators: Grandor, ned, Guitarzan

Post Reply
Boogie man 31
Bottle Rocket
Posts: 1
Joined: Sat May 16, 2020 11:36 am

TC-50 footswitch on RA-100 amp?

Post by Boogie man 31 » Sat May 16, 2020 11:43 am

Hey guys, new here. I just bought an RA100 with an aftermarket footswitch that's faulty. Finding a replacement switch is proving to be difficult at best. In the meantime I found a triple Crown 50 switch. So my question is, could I use the triple 50 switch and just ignore the extra buttons?

Also I know mesa makes a replacent generic switch for the RA but I'm not a fan of how it looks. So that's a last resort.

User avatar
the recluse
Mark II
Posts: 60
Joined: Thu Jun 09, 2011 1:05 pm

Re: TC-50 footswitch on RA-100 amp?

Post by the recluse » Wed May 20, 2020 9:49 pm

Short answer is no. TC connects with a 6-pin DIN connector and the RA Footswitch is just a 1/4" TRS cable. If you're after the older style wedge shaped Footswitch, the electradyne uses the same switching as the RA so that Footswitch would work.

Post Reply