Mesa Boogie 2:90 voice switching

The Boogie Board

Help Support The Boogie Board:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

federico167

New member
Joined
Aug 6, 2017
Messages
1
Reaction score
0
Hi everyone, this is my very first post because I have a problem with my 2:90 (I couldn't find a tread about this)

I don't have a triaxis, I use it with anther preamp, so, the voice switching is working strangely... (I have bought the 2:90 some months ago)
When I power it... the 3 voicing leds are on... then.. some minutes later, they start switching off automatically.... If I want to swith tem, I have to use closed plugs connected to the switching imputs.

the question is... anyone have a footswitch schematic around there?

PS: Sorry for my bad english, thanks
 
You shouldn't necessarily need a schematic, just a simple foot-switch that is open or closed to act like inserting or removing your shorted plug you've been using instead. Most simple footswitches work this way.
 
Back
Top