Problem with Lead 2 mode on triaxis !RESOLVED!

Triaxis, Quad Preamp, Stereo Power series, Recto Preamp

Moderators: Guitarzan, Grandor, ned

Post Reply
Metalmilitia
Bottle Rocket
Posts: 2
Joined: Sun Apr 23, 2017 10:34 am

Problem with Lead 2 mode on triaxis !RESOLVED!

Post by Metalmilitia » Sun Apr 23, 2017 12:35 pm

Hi,

I'm an half-happy owner of a Triaxis V2, because I bought one yesterday, but I have some problem with the unit. It seems to work fine, except for the lead 1 mode, especially with the Red mode of lead 1.
I have the same issue of a forum's old member ( Post subject: Questions about Triaxis) that I quote below:

"3. I noticed that LEAD 1 DRIVE handles gain for all modes in LD1 and LEAD 2 DRIVE handles for LD2, but I've found that in LD1 Red mode LEAD 2 DRIVE is involve and even more effect that LEAD 1 DRIVE"
And I add: when I select the RED lead 1 mode, the volume drop very low compared to all the other mode.

I've opened the chassis and I took a look inside. It's seems that the C257 blowed up, and maybe one of LDR, because it present a strange white stain on the side of the package.
My question is: maybe this the source of the issue? I can resolve this problem putting a new cap (with the same characteristics)?
I can post some picture that I have make.
Thanks for the all the help you can give me and sorry for my bad english.
Last edited by Metalmilitia on Mon Apr 24, 2017 12:11 pm, edited 1 time in total.

Metalmilitia
Bottle Rocket
Posts: 2
Joined: Sun Apr 23, 2017 10:34 am

Re: Problem with Lead 2 mode on triaxis

Post by Metalmilitia » Mon Apr 24, 2017 12:11 pm

Resolved

Putting a new 10uf 40v electrolitic cap (instead of tallium 15uf 15v ) It's seems all work fine! I hope this can help someone in the future! Bye!

Post Reply