Triaxis disassembly for display repair?

Triaxis, Quad Preamp, Stereo Power series, Recto Preamp

Moderators: Grandor, ned, Guitarzan

Post Reply
Bottle Rocket
Posts: 3
Joined: Fri Sep 21, 2012 11:39 am

Triaxis disassembly for display repair?

Post by toddler68 » Fri Feb 27, 2015 4:24 pm

I am attempting to replace a few of the LED displays on the front of my Triaxis, but getting the front panel loose is proving to be difficult. I did some forum searching and came up with a hit regarding disassembly instructions on, but I can't seem to find them on that site anywhere.

Sooooo, does anyone know offhand how to remove the front panel? Can it be done without removing the graphic label from the front?

Any help would be much appreciated...


User avatar
Mark III
Posts: 238
Joined: Sun Jan 16, 2011 2:19 am
Location: Germany

Re: Triaxis disassembly for display repair?

Post by Triaxstasy » Sat Feb 28, 2015 4:19 am


User avatar
Mark IV
Posts: 812
Joined: Sat Dec 11, 2010 5:49 am

Re: Triaxis disassembly for display repair?

Post by Jackie » Mon Mar 02, 2015 12:29 pm

All I can say is... good luck, I talked about it with my tech once and he said he'd rather get electrocuted than have to replace TriAxis LEDs again. He didn't give me any details, but from that I assume it must be pretty damn hard and/or time consuming.
GUITARS: heavily modded Epi Goth Explorer; Jackson KVMG Pro; Yamaha SG2000; Gibson SG '61 Reissue; Squier CV Tele
AMPS:Mesa/Boogie 2:90+TriAxis; Marshall JVM410H (modded); Marshall 1960A w/V30

Mark I
Posts: 29
Joined: Fri Feb 29, 2008 8:39 am

Re: Triaxis disassembly for display repair?

Post by Bibo » Tue Oct 06, 2015 6:27 pm

I had the same problem. It turned out that you dont need to remove the faceplate to get to the LED-pcb. See pictures.



Post Reply