Hi,
Hopefully someone can help me as I am so confused!! I need advice, diagrams to help setup my first rack system.
My equipment is as follows:
Aphex 109 Parametric Tube Eq
DMC System Mix Dual Stereo Line Mixer
GCX Guitar Audio Switcher with Ground Control
TC Electronics G-Major
DBX 166XL Compresor\Limiter\Gate
Kirk Hammett Wah Wah
Ibanez Tube Screamer modified by Analogman
Mesa Boogie Triaxis
Mesa Boogie Simul Class 2:90 Power Amp
Mesa Boogie Rectifier Triple Channel with Weber Mass 150 as Dummy Load
Mesa Boogie 4x12 cab
Basicly I want all this to run through the 2:90 and so far I have it setup as the following:
Guitar > GCX Feed Thru > Loop1 = Wah > Loop2 =Tube Screamer > Loop 3=G-Major > Loop 4 = Triaxis > Loop 5 = Rectifier > GCX Out > System Mix - Mix 1 in1 > System Mix - Mix 2 Out > Aphex EQ > DBX Noise Gate > Mesa 2:90
This config doesn't sound bad but when I try to mix the Triaxis and Recto it sounds awful!! Now....Clearly I have no idea how to set this up so any help would be appreciated.
I am trying to get as near to that Metallica sound as possible!!
Please use diagrams if possible for simplicity sake - Thanks Guys
Hopefully someone can help me as I am so confused!! I need advice, diagrams to help setup my first rack system.
My equipment is as follows:
Aphex 109 Parametric Tube Eq
DMC System Mix Dual Stereo Line Mixer
GCX Guitar Audio Switcher with Ground Control
TC Electronics G-Major
DBX 166XL Compresor\Limiter\Gate
Kirk Hammett Wah Wah
Ibanez Tube Screamer modified by Analogman
Mesa Boogie Triaxis
Mesa Boogie Simul Class 2:90 Power Amp
Mesa Boogie Rectifier Triple Channel with Weber Mass 150 as Dummy Load
Mesa Boogie 4x12 cab
Basicly I want all this to run through the 2:90 and so far I have it setup as the following:
Guitar > GCX Feed Thru > Loop1 = Wah > Loop2 =Tube Screamer > Loop 3=G-Major > Loop 4 = Triaxis > Loop 5 = Rectifier > GCX Out > System Mix - Mix 1 in1 > System Mix - Mix 2 Out > Aphex EQ > DBX Noise Gate > Mesa 2:90
This config doesn't sound bad but when I try to mix the Triaxis and Recto it sounds awful!! Now....Clearly I have no idea how to set this up so any help would be appreciated.
I am trying to get as near to that Metallica sound as possible!!
Please use diagrams if possible for simplicity sake - Thanks Guys