Inputs on Vertical Recto Cab

CudBucket · Feb 1, 2005

On my vertical recto cab there is an 8 ohm jack and then a "parallel out" jack. What does the parallel jack do? Is it a stereo out to drive each speaker separately? If so, would each speaker present a 16ohm load?

Thanks.

Dave

FireBros. · Feb 1, 2005

The parallel out is to daisy chain another cab with that one. It won't make it stereo, it just sends the same signal to another speaker. If the other cab is an 8 ohm one, your amp will "see", 4 ohms, not 16 ohms.

CudBucket · Feb 2, 2005

So I can either daisy chain the cabs together or use the 4 ohm jacks on the head?

FireBros. · Feb 3, 2005

If you daisy chain them, you should also use one of the 4 ohm jacks. The 4 ohm jacks are in parrallel.

Inputs on Vertical Recto Cab

Help Support The Boogie Board:

CudBucket

Well-known member

FireBros.

Member

CudBucket

Well-known member

FireBros.

Member

Similar threads

Latest posts

Inputs on Vertical Recto Cab

Help Support The Boogie Board:

CudBucket

Well-known member

FireBros.

Member

CudBucket

Well-known member

FireBros.

Member

Similar threads

Latest posts

Join the conversation!

Join today and get all the highlights of this community direct to your inbox. It's FREE!