Clean channel dc5 won't work

The Boogie Board

Help Support The Boogie Board:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Faverey

New member
Joined
May 11, 2016
Messages
2
Reaction score
0
Hello,

I have a problem with my mesa dc5 amp. The clean channel does not work anymore, the strange thing is that the lead channel is working ok.
If I turn up the volume on the clean channel, I can hear it get louder but no signal, also the high mid and low "work"
do you have any suggestion on what this might be?

best regards,

Faverey
 
Faverey said:
Hello,

I have a problem with my mesa dc5 amp. The clean channel does not work anymore, the strange thing is that the lead channel is working ok.
If I turn up the volume on the clean channel, I can hear it get louder but no signal, also the high mid and low "work"
do you have any suggestion on what this might be?

best regards,

Faverey
Welcome.

Have you tried swapping preamp tubes?

According to the info in this thread:
http://forum.grailtone.com/viewtopic.php?f=28&t=34284
V4 is exclusively for the rhythm channel, and also one half of V1.

I would check those first (V4, then V1).

Dom
 
Back
Top