The Boogie Board

Discussion Forum for Mesa Boogie Products
It is currently Fri Dec 15, 2017 7:10 am

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 2 posts ] 
Author Message
PostPosted: Thu Feb 04, 2016 1:59 pm 
Offline
Bottle Rocket

Joined: Thu Feb 04, 2016 1:36 pm
Posts: 1
https://m.youtube.com/watch?v=NKK7HGs0OB4

This is a link to a video of the problem

I was playing with a few pedals in the effects loop and wanted to see the tone loss I was getting etc
I went to remove the effects loop cable while the amp was on and was not in standby after I did this the amp started making the hum and static noise ( the static noise sounds like when a cable or guitar jack have gone bad) the noise in the video is coming from the amp it is not my hands moving the camera around or anything. The noise continues if the effects loop is plugged back in or even when no cables are connected to the amp just the amp straight to the cabinet.
Did I blow a preamp tube or my speaker or anything? I did not know you could not remove effects loop cables from an amp while it was still on
Any help would he appreciated I just got this amp yesturday from sweet water so I'm extremely upset but take full blame if I was a dumbass and blew a tube and or anything
Please watch the video and give me any help guys
thank you for your time!


Top
 Profile  
 
PostPosted: Fri Feb 19, 2016 10:30 pm 
Offline
Mark II

Joined: Tue Nov 18, 2014 11:09 pm
Posts: 54
The static sounds like a bad preamp tube. I've had that in a number of amps over the years.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Users browsing this forum: Google [Bot] and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group