Stupid Hotplate Question

The Boogie Board

Help Support The Boogie Board:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

CudBucket

Well-known member
Joined
Jan 25, 2005
Messages
1,413
Reaction score
0
Just got a Hotplate off Ebay. It's in mint condition. I don't have an extra speaker cable to connect it with but I'll pick that up today.

What should I do to ensure that it works properly? I know this sounds stupid but I'm just asking so I can be sure.

Thanks.

Dave
 
Basically, just hook it up, and crank the amp, turn the knobs. It's pretty simple. On the -16dB setting, the knob on the right will adjust the volume. On every other setting, it will do nothing. Just mess with it, and you will know if it works or not.
 
Make sure you get a really good speaker cable to connect the amp to the Hotplate. The danger is the wire becomes the attenuator and causes your transformer to blow. Just get a good quality and appropriate guage speaker wire for your amp.

Ned
 

Latest posts

Back
Top