Newb Question

The Boogie Board

Help Support The Boogie Board:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

GADonis

Member
Joined
Feb 15, 2017
Messages
17
Reaction score
0
I just bought a used TC-50 with a horizontal 2x12 cabinet. I've always used combo amps so this is my first head and cab set up. Is there any difference between the two Speaker outputs? I know that hooking up my single 8 ohm 2x12 cabinet I should have the switch set to 8 ohms but I was just wondering if it mattered which output I hooked up to. I didn't see anything in manual which leads me to believe it doesn't really matter.
 
Either of the speaker outs on the head is fine. They are in parallel. Assuming it’s a Mesa 212, set the head for 8 ohm.
 

Latest posts

Back
Top