Newb Question

Discussion area for the new TC50

Moderators: Guitarzan, Grandor, ned, Platypus

Post Reply
GADonis
Bottle Rocket
Posts: 13
Joined: Wed Feb 15, 2017 10:52 am

Newb Question

Post by GADonis » Wed Oct 17, 2018 9:51 am

I just bought a used TC-50 with a horizontal 2x12 cabinet. I've always used combo amps so this is my first head and cab set up. Is there any difference between the two Speaker outputs? I know that hooking up my single 8 ohm 2x12 cabinet I should have the switch set to 8 ohms but I was just wondering if it mattered which output I hooked up to. I didn't see anything in manual which leads me to believe it doesn't really matter.
Express Plus 5:50, TC-50 with 2x12 Horizontal Cabinet, 70's Fender Deluxe Reverb, Pro Junior. Too many guitars to list but #1-Fender Hwy1 Tele w/ Muy Grande pups, #2A-PRS McCarty Korina w/ P90's, #2B-Fender Double Cut Telecaster w/Dirty Harry pups.

User avatar
Monstercastle
Mark III
Posts: 203
Joined: Sun Aug 14, 2005 8:03 am

Re: Newb Question

Post by Monstercastle » Wed Oct 17, 2018 8:24 pm

Either of the speaker outs on the head is fine. They are in parallel. Assuming it’s a Mesa 212, set the head for 8 ohm.
Mark V:25 Head, TC-100 head, Vertical 212, Widebody Closed 112
Gone but not forgotten: LSS 112, Mark V Head

Post Reply