Im not too sure if this is just my Source Audio Eq pedal being out front or the amp itself yet but sometimes when i use the tc50 it misbehaves, once when i fired it up there was a strange buzz in the distance, then i tried to change chanels and it wouldnt do so using the tc50 footswitch, if i pressed and held the tc50 footswitch channel selection buttons id hear these strange digital noises a little similar to when we use to hook up to the internet in the retro days and no channel switching would occur...
I turned the amp off then on and the footswitch worked fine, but there was still a buzz in the background of my tone when ever i hit a note. I then turned off the amp and pulled all pedals and presto, all seemed ok... I then put the Source Audio Eq in the loop and the TC50 seemed to work fine...
Curious if anyone has had such an issue, ill try putting the Eq out front tomorrow and see what happens but im wondering if i should return the tc50 in case its a faulty amp? I guess time will tell, im in Australia and this little 50w head set me back 4k here so i am slightly concerned.
Has any one else experienced such issues?
I turned the amp off then on and the footswitch worked fine, but there was still a buzz in the background of my tone when ever i hit a note. I then turned off the amp and pulled all pedals and presto, all seemed ok... I then put the Source Audio Eq in the loop and the TC50 seemed to work fine...
Curious if anyone has had such an issue, ill try putting the Eq out front tomorrow and see what happens but im wondering if i should return the tc50 in case its a faulty amp? I guess time will tell, im in Australia and this little 50w head set me back 4k here so i am slightly concerned.
Has any one else experienced such issues?