Train of Thought settings

Discussion area for the new (and first) Signature Model from Mesa Engineering.

Moderators: Guitarzan, Grandor, ned, Platypus

Post Reply
nero321
Bottle Rocket
Posts: 1
Joined: Tue Aug 27, 2019 1:44 pm

Train of Thought settings

Post by nero321 » Thu Aug 29, 2019 3:42 pm

Hey guys :)
I'm considering buying a jp-2c, and looking for some help with tweaking the amp in the direction of the rhythm sound in ToT (some examples are stream of consciousness, this dying soul), and if possible, at relatively low volume.
Any tips on how i should set the graphic eq for that? if you can provide your complete setting of channel 2, that's even better :)
Other than that i must say that i got some KILLER lead tones from channel 3 :D the only thing keeping me from buying this amp right now is that i still haven't found a rhythm tone that i felt good with (granted i really didn't have time to tweak and play with it)

Thaymz
Mark II
Posts: 130
Joined: Wed Apr 20, 2016 6:04 pm

Re: Train of Thought settings

Post by Thaymz » Fri Aug 30, 2019 3:58 am

I think you’re more likely to get close to Train of thought by tweaking the tone controls rather than the GEQ (or both).

If I recall he used a roadking for that so it has more gain bass and is less tight.

If I were going for that I’d pull gain, treble around up 3 oclock, up the bass to around 11 and crank the mid control a bit.

mace
Mark III
Posts: 239
Joined: Sun Feb 02, 2014 11:51 am

Re: Train of Thought settings

Post by mace » Fri Aug 30, 2019 8:16 am

Yeah, that album has a pretty distinct Recto style sound. Gnarly, nasty, big and open. A bit of a challenge to get a Mark to duplicate it.
Rankings: #1 Mark V head, #1b TC50 combo, #3 Rectoverb 25 head

Post Reply