JP2C rackmount reverb tank

Discussion area for the new (and first) Signature Model from Mesa Engineering.

Moderators: Guitarzan, Grandor, ned, Platypus

Post Reply
Bottle Rocket
Posts: 3
Joined: Tue Nov 04, 2014 8:02 pm

JP2C rackmount reverb tank

Post by Mikeishness » Fri Oct 13, 2017 4:37 pm

I just got the kit to convert my JP2C head to rackmount. But I can't figure out how the reverb tank is attached. Looks like there might not be room for it since the transformers get in the way. Anyone know how the reverb tank fits in a rackmount JP2C?

Donating Member
Posts: 297
Joined: Wed Dec 22, 2010 2:57 pm

Re: JP2C rackmount reverb tank

Post by JMMP » Mon Oct 30, 2017 7:40 pm

If it's like my rackmount Mark IV, the reverb is attached outside of the rack mount box. Mine was mounted to a plank of wood in a fabric reverb bag and sat in the back of the rack when I bought it (used). I have not seen a mesa rack kit with a way to mount the reverb to it.
Roadster, Mark IV, Electra-Dyne, Fillmore, Traditional/ Stiletto 412
Gone: Quad MIDI Pre, TriAxis V1 & V2, Formula Pre, 2:90, 20/20, JP-2C LTD, TA-15

Bottle Rocket
Posts: 6
Joined: Fri Mar 24, 2017 2:05 pm

Re: JP2C rackmount reverb tank

Post by Mariano » Tue Oct 31, 2017 9:51 am

I had the same question so I called Mesa and they told me to put it wherever I have space in the rack, it's not meant to be attached to the rack kit

I ended up not putting it at all, since I use digital reverb anyway

Post Reply