The Boogie Board

Discussion Forum for Mesa Boogie Products
It is currently Thu Dec 14, 2017 11:26 pm

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 3 posts ] 
Author Message
PostPosted: Mon May 15, 2017 11:43 am 
Offline
Bottle Rocket

Joined: Tue Feb 09, 2016 9:59 am
Posts: 12
Does anyone else use the JP-2C with the Axe FXII in a live situation with the 4 cable method?

Just wondering how you deal with volume outputs in different venues?

I've currently levelled out my 3 JP channels to roughly the same output and am then using the front "output 2" on the Axe to control the signal back to the power amp section of the JP.
This also allows me to sneak some modelled amps into my scenes and keep the levels the same.

Love the JP but can't help but think it should have an overall master volume covering all three channels.
Was toying with a power soak so I can really drive the amp but still have control over the final output.

Anyone got any thoughts/alternative suggestions?

S


Top
 Profile  
 
PostPosted: Fri Oct 13, 2017 6:11 pm 
Offline
Mark II

Joined: Wed Apr 20, 2016 6:04 pm
Posts: 59
Hi there

I use the Torpedo Reload as a power soak and variable attenuator on the JP. Works amazingly well and couldn't recommend it more for any tube amp.

I was hoping the output knob on the Torpedo captor was for the speaker volume but it only adjusts the output level going into your interface or other gear.

Do you find there's a lot of noise using the JP with 4CM on the Axe? I have a massive ground loop issue I think and just wondering if it's specifically my setup or common to the amp with the axe.


Top
 Profile  
 
PostPosted: Fri Nov 03, 2017 2:34 pm 
Offline
Bottle Rocket
User avatar

Joined: Wed Nov 02, 2016 8:56 pm
Posts: 16
I've used the 4CM with my Axe-FX Ultra and the JP-2C. I'm not entirely sure how unity gain works on the Ultra vs the II, but I have my knobs on the front like so:

In 1 - Noon
In 2 - 2:30
Out 1 - maxed
Out 2 - maxed

It seems to work pretty well, though my guitar has been picking up the Mesa's transformer sometime with higher gain settings. Reducing in 2 helps a little, but it's tough in shred mode or boosted, maxed gain.

_________________
EBMM JP7
JP-2C | Recto 2x12 Vertical
AXE-FX Ultra | MFC-101 Mk III


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group