stimpyjp2c
New member
- Joined
- Apr 22, 2017
- Messages
- 3
- Reaction score
- 0
Hi all
Just got my JP-2C and unplugged my AXE FXII midi cable from my Triaxis and plugged into the JP, all set to channel 1 (dip on back of JP to zero)
So, I select a patch on the AXE, reset all the switches to where I want them on the JP and hot store, red light flashes so all should be done.
Only when I change back and forth to the patch the amp briefly goes to the clean channel as per my settings then hops back to channel 2.
Any ideas anyone?
Cheers
Steve
Just got my JP-2C and unplugged my AXE FXII midi cable from my Triaxis and plugged into the JP, all set to channel 1 (dip on back of JP to zero)
So, I select a patch on the AXE, reset all the switches to where I want them on the JP and hot store, red light flashes so all should be done.
Only when I change back and forth to the patch the amp briefly goes to the clean channel as per my settings then hops back to channel 2.
Any ideas anyone?
Cheers
Steve