Hello, I am new to this forum, and this is my first post. To make the story short, I bought a second hand TA-30 Head (my first Mesa branded amp), that I have linked to a Bogner 2x 12 cabinet with Celestion speakers (G12 H30 Vintage series 30 watts + G12 Blue Alnico 15 watts), and it was working normally with the 15 watts mode.
Until recently that I decided to switch to 30 or 40 watts, and the problem appears: In high power mode the amp shuts down itself after less than 5 minutes of playing in those power modes (30 or 40 watts).
What do you think is the problem and what should I do? I love my TA-30 amp, and I hope I can solve this problem with your help.
Thanks for all your help in advance.
Until recently that I decided to switch to 30 or 40 watts, and the problem appears: In high power mode the amp shuts down itself after less than 5 minutes of playing in those power modes (30 or 40 watts).
What do you think is the problem and what should I do? I love my TA-30 amp, and I hope I can solve this problem with your help.
Thanks for all your help in advance.