RA 100 - Question Re Control Layout

The Boogie Board

Help Support The Boogie Board:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
S

Sukodil

Member
Joined
Jun 27, 2011
Messages
24
Reaction score
0
I have the 2x12 combo. When facing the amp, the HI/LO Channel is on the left and the clean channel is on the right. I have noticed on some of the Youtube videos that some of the amps controls are reversed with the HI/LO on the right and the clean on the left. What's the deal? Was there a change in the control layout?
 
I'd assume that what you are seeing is the head version vs Combo. The combo is mounted flipped compared to the head version so the controls are on oposite sides. The front panel is also printed for the orientation so you can't swap a combo chassis into a head shell without the pot ratation and writing being upside down.
 
I didn't realize there was a difference between head v. Combo. Thanks for clearing that up.
 

Similar threads

bandit2013
Another thread on the RA100, Power tubes
Replies
0
Views
446
bandit2013
bandit2013
rarebitusa
Voicing Control Mod
Replies
13
Views
551
tbonesullivan
T
rsilverst
Maverick Combo "low end" on clean channel?
Replies
12
Views
495
rsilverst
rsilverst
bandit2013
Two different amps at the same price: TC100 vs Mark VII
Replies
8
Views
2K
mace
M
Rob Snelders
Bass overdrive "crack" rumble on Clean. Feature or Faulty?
Replies
2
Views
594
Rob Snelders
Rob Snelders

Latest posts

Back
Top