• If you have bought, sold or gained information from our Classifieds, please donate toThe Boogie Board and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

WANTED: Part for TriAxis (Optocoupler).

The Boogie Board

Help Support The Boogie Board:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Villain180

Member
Joined
Aug 9, 2010
Messages
11
Reaction score
0
Hey All
I'm in desperate need of the below Optocoupler as NO ONE in denmark can get one as a spare part.... So if anyone have a non working TriAxis or know where or how to get a hold of one of these bad boys please get in touch ASAP..

You can write to [email protected]

All the best
Allan
----------------------------

I have an older TriAxis that needs the specific Octocoupler - LDR P873-13

I have so far found this:
According to John Marshall at Mesa, it's impossible to undo the phat mod as the main board has a different layout as well. The whole reason they stopped making the TX4 board was because of lack of supplies (optocouplers). Pretty much you have to sell your newer phat mod version and get an older version 2 with the TX4 pcb. serial # range 1631 - 8279.

Do anyone out there know what to do?????

Best regards
Allan
 
Back
Top