5 and 15 watt settings don't work

The Boogie Board

Help Support The Boogie Board:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

jontherev

Member
Joined
Feb 16, 2005
Messages
10
Reaction score
0
Howdy! Just wondering if anyone’s run across this before and has any suggestions. I blew a fuse in my 1x12 LSS and after replacing it and installing new tubes (brand new, from Mesa), it worked about 30 minutes, after which the only setting that would work was the 30W on either channel. I get nothing from the 5/15 W on either channel. This was last December, so I’ve been using the 30W exclusively since then! I have an awesome repair guy (shout out to Andrews Amp Lab) who repaired this for me about 13 years ago when I had a similar problem, and I’ll definitely be taking it back…just thought I’d reach out to see if this is common or if anyone had any suggestions. I believe the original problem was a bad capacitor, and ALL channels were dead I think (kicks self for not keeping paperwork), but my memory has faded with time. Anyway, just reaching out to see if anyone else has had this issue, if it’s a recurring issue, how you’ve fixed it, etc. Thanks and boogie on!

Jon
 
Thanks, I admit I'm out of my element troubleshooting this. But, I do believe I have an extra rec tube...thanks again for the tip.
 
Back
Top