Lonestar Lossy Crunch out Problem oh please help

The Boogie Board

Help Support The Boogie Board:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
D

django

New member
Joined
Jan 9, 2012
Messages
4
Reaction score
0
Dear gurus...please advise:

My Lonestar is 'crunching out' when i play at any volume. Like the sound disappears a little and kind of makes a crunchy sound when it does. I've tried new cord and guitar and its still the same. Its almost like its getting too much signal to process...any ideas?

please help i need to fix asap!
 
Maybe time for tubes. I would check preamp first. Get a known good preamp ube and swap it in and out of each position and see if it goes away each time you swap
 
took it to the man and tested the tubes...they seemed to be okay, but he put in a few new ones. i couldn't seem to reproduce the crunch...time will tell.
 
Is the effects loop in or set to hard bypass?

we just seem to get a few posts with problems that are cured with cleaning the jack sockets on the loop
 

Similar threads

Z
Mark v25 channel 2 problem
Replies
2
Views
264
ZorroBoy
Z
T
Mark V Channel 2 Problem
Replies
19
Views
2K
bandit2013
bandit2013
G
Help please Mesa Triaxis Lead 1 issue
Replies
1
Views
327
harrisonguitars
harrisonguitars
JustPassingThrough
Need some big help restoring my Tremoverb (strange mods)
Replies
7
Views
653
JustPassingThrough
JustPassingThrough
R
Mark iic+ misbehaving
Replies
14
Views
2K
Henz
H

Latest posts

Back
Top