I made the ch.2 Drive/Clean footswitch mod this morning. To avoid drilling the chassis, I inserted the jack in place of the reverb switch jack (the one under...).
For commodity reasons, I choose to put the 2pdt stompswitch in the original LS footswitch, with a green led as a Drive/Clean indicator (drilling 3 holes : led, input jack, stomp). The led is powered in // with the existing two others.
Everything works fine, BUT : now the SOLO pot on the front pannel is always active (in Ch. 2), and I noticed a small volume drop in Ch. 2 when pluging the (drive/clean) jack in the footswitch!!!!
I previously made both Reeder mods. The masters pots swap is really effective ; no such thing can be said about the Mid pots mod (maybe I don't play loud enough).
For commodity reasons, I choose to put the 2pdt stompswitch in the original LS footswitch, with a green led as a Drive/Clean indicator (drilling 3 holes : led, input jack, stomp). The led is powered in // with the existing two others.
Everything works fine, BUT : now the SOLO pot on the front pannel is always active (in Ch. 2), and I noticed a small volume drop in Ch. 2 when pluging the (drive/clean) jack in the footswitch!!!!
I previously made both Reeder mods. The masters pots swap is really effective ; no such thing can be said about the Mid pots mod (maybe I don't play loud enough).