Mark III ----> 16 ohm cab

The Boogie Board

Help Support The Boogie Board:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

axwielding1

Well-known member
Joined
Jan 31, 2005
Messages
453
Reaction score
0
Location
New York
My son needs to use my boogie this weekend for a gig, as his TSL100 is in the shop.. His cab is 16 ohms, and has 4 Celestion 85's. I tried it, and it sounds good, but do you see a problem? I know Boogies can handle different ohm loads, but at his stage volume, will it be a problem?
On his TSL, his gain is at 7-8 and master at 7, the Boog's corresponding volume would be 5-6 with a lead master at around 4....
ax. :twisted:
 
I used my Boogies with an old Marshall cab many times with no ill effects. Just make sure you plug it into the 8 ohm speaker jack.
 

Latest posts

Back
Top