Simul,s outer

The Boogie Board

Help Support The Boogie Board:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
H

Henz

Moderator
Staff member
Joined
May 19, 2016
Messages
343
Reaction score
19
Location
USA Pittsburghish
I'm just replacing my outer sockets on my DRG. It's a C+. I tube roll tween 6L6's and EL34's. What screen resistor value would anyone recommend? 470's, 2.7k's, 1k's? I'm gonna tie pins 1 and 8 together. My bias resistors are 220k on outer, and 2.2k on inner. Peace. Jim
 
I think 470s were used until pentode operation on the Mark IIIs and IVs came in. Then they used 2.7K. Someone out there might know the difference though. I'd stick with 470 though.

For context Henz's power board is missing pin 1 on the power sockets, hence the reason to replace them. Just copy other pictures of simul IICs+ which have a pin 1 present on the power sockets. KISS principle: Keep it simple, stupid.
 

Similar threads

D
50/50 High Plates Voltage
Replies
7
Views
1K
Jay Omega
J
D
Mesa EL34 "matching" duet disparate current problem
Replies
0
Views
238
dozturk
D
W
Mark III blue stripe redplating, quick diagnosis and repair
2 3
Replies
41
Views
5K
Henz
H
V
For Sale Mesa Boogie Stereo Simul-Class 2:Ninety 2-Channel 90-Watt Power Amplifier
Replies
2
Views
1K
Vogt-RK75
V
H
MKIIC+ voltages
Replies
3
Views
3K
GJgo
G

Latest posts

Back
Top